Benchside / Wall storage / Wall Cabinet
Wall storage
Wall Cabinet
A real plywood cabinet that hangs on a French cleat: rabbeted corners, a back let into a groove, adjustable shelves on pins (or fixed in dados), and doors on 35mm concealed hinges.
Standard size24 × 12 3/4 × 30 in
You'll need2 sheets
Parts to cut13
Plan$15, once
Change any size and Benchside redraws it, recounts the material and rebuilds the plan.
Built around your shop
- Any width; past 36" inside, partitions split it into bays so shelves don't sag
- Adjustable or fixed shelves, with edge strips or plain
- One door, a pair, or none
- How high it hangs, from your bench height
How it goes together
- Cut the rabbets, the back groove and the shelf-pin holes before assembly.
- Glue up the box with the back in its groove and the cleat and bottom stretcher behind it.
- Bore the hinge cups and hang the doors.
- Screw the wall cleat to the studs and hang the cabinet on it.
The plan has every step written against the part letters in its cut list, with drawings of each part that has joinery.
What you can change
SizeShelves and doorsBox and shelvesBackDoors
Hardware
| 2 | 35mm concealed cup hinges, full overlay, 110°, with mounting plates |
| 1 | Door pulls |
| 8 | Shelf pins, 1/4" |
Plus screws and glue, counted in the shopping list.
In the $15 plan
- Cut list with every part lettered
- Cutting diagrams for every sheet and board, grain kept straight
- Printable build plan: overview, drawings, part drawings and steps
- CNC files: DXF sheets and a STEP 3D model
Bought once for your design, and it stays yours through any edits and resizes. The 3D view and shopping list are free.
